Safety
Safety 627
• If you have long hair, make sure that it is restrained.
• Take care that sleeves and gloves do not get caught in the mechanical parts of the printer.
• Stay clear of the print path when the carriage is moving.
• Also make sure that there are no tools obstructing the operation of the printer.
Scan Axis Encoder Strip hazard
The Scan Axis Encoder Strip is very sharp, and can easily cut your hands when you must work near it.
Best practice
• Wear protective gloves if you must touch the Scan Axis Encoder Strip.
• Do not wear loose clothing or jewelry.
Burn hazard (heating and curing)
The components of the heating and curing systems get very hot and can seriously burn you.
Best practice
• Be careful when you work near the print path.
• Before working on the heating and curing modules, make sure that they are completely cooled off.
Lifting and handling
Improper handling of heavy materials can lead to serious bodily injury.
Best practice
• When handling substrate rolls, care must be taken to avoid back strain and/or injury.
• Always use a forklift, pallet truck, or other handling equipment to lift substrates.
• Always wear personal protective equipment like boots and gloves.
• Follow any manpower instructions included in this service manual when you replace components.
Many components, require at least two people for removal.
To Next Page
Loading...