2 Basic operations
Turn the scanner on or off
The system (scanner, screen and software) can be turned on or off by pressing the
power button on the scanner operation panel.
NOTE: The printer has a separate power on/off button. Normally this button is
always left turned on and is not pressed in connection with restarting the system.
Turn on
Press the power button. The power LED shows a green light.
Turn off
Press the power button. The power LED blinks and then turns off.
Restart
Press the power button to turn the system off and then press it again to turn the
system on.
4 Chapter 2 Basic operations ENWW
Basic operations
Learning Products Barcelona - Hewlett-Packard Company
To Next Page
Loading...