HP Designjet T1120 Series - Physical specifications; Memory specifications; Power specifications

Table 20-5 Mechanical accuracy
±0.1% of the specified vector length or ±0.1 mm (whichever is greater) at 23°C (73°F), 50-60% relative humidity, on E/A0
printing material in Best or Normal mode with HP Matte Film roll feed.
Table 20-6 Graphic languages supported
HP PCL3 GUI, HP GL/2 RTL, CALS/G4, PDF (HP Designjet T1120ps only), PostScript (HP Designjet T1120ps only), TIFF (HP
Designjet T1120ps only), JPEG (HP Designjet T1120ps only)
Physical specifications
Table 20-7 Printer physical specifications
24-inch printer 24-inch printer (without stand) 44-inch printer
Weight 143 lb (65 kg) 103.6 lb (47 kg) 189 lb (86 kg)
Width 49.7 inches (1262 mm) 49.7 inches (1262 mm) 69.7 inches (1770 mm)
Depth Minimum: 26 inches (661 mm)
Maximum: 28.8 inches (732 mm)
Minimum: 26 inches (661 mm)
Maximum: 28.8 inches (732 mm)
Minimum: 26 inches (661 mm)
Maximum: 28.8 inches (732 mm)
Height 41.2 inches (1047 mm) 15.4 inches (391 mm) 41.2 inches (1047 mm)
Memory specifications
Table 20-8 Memory specifications
HP Designjet T1120 Memory (DRAM) supplied 384 MB
HP Designjet T1120ps Memory (DRAM) supplied 320 MB
Hard disk 80 GB
Power specifications
Table 20-9 Printer power specifications
Source 100–240 V ac ±10%, auto-ranging
Frequency 50–60 Hz
Current < 2 A
Consumption < 200 W
Ecological specifications
This product complies with European Union WEEE and RoHS Directives. To determine the ENERGY
STAR qualification status of these product models, please go to
http://www.hp.com/go/energystar.
For the up-to-date ecological specifications of your printer, please go to
http://www.hp.com/ and search
for “ecological specifications”.
ENWW Physical specifications 191
Printer specifications
Downloaded from ManualsPrinter.com Manuals