Here are some settings that may be used in typical situations.
NOTE: The Type is and Source is settings are in the printer driver and the Embedded Web Server; the Roll
switching policy is set in the front panel.
●
With different paper types loaded:
◦
Type is: Select the paper type you require
◦
Source is: Automatically select / Predetermined
◦
Roll switching policy: doesn't matter
●
With different paper widths loaded:
◦
Type is: Use printer settings
◦
Source is: Automatically select / Predetermined
◦
Roll switching policy: Minimize paper waste
TIP: You can also save paper in some cases by rotating or nesting your images. See Use paper
economically on page 81.
●
With identical rolls loaded:
◦
Type is: Use printer settings
◦
Source is: Automatically select / Predetermined
◦
Roll switching policy: Minimize roll changes
68 Chapter 7 Working with two rolls ENWW
To Next Page
Loading...