HP Designjet T3500 Production eMFP - 7 Working with two rolls; The uses of a multiroll printer; How the printer allocates jobs to paper rolls

6. Insert the edge of the paper into the printer.
WARNING! Do not push your fingers inside the printer's paper path.
7. Roll the paper into the printer until you feel resistance and the paper flexes slightly. When the printer
detects the paper, it feeds it in automatically.
8. If the leading edge of the paper has a barcode, the printer reads and then cuts off the barcode, which
falls into the basket.
9. If the leading edge of the paper has no barcode, the front panel prompts you to select the paper
category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see The paper type
is not in the list on page 169.
10. If the Printing paper info option is enabled, the front panel may ask you to specify the length of the
roll. See Printing paper info on page 61.
11. Close the roll cover when the front panel prompts you to do so.
54 Chapter 6 Paper handling ENWW