7. Push the sheet into the printer until it will not go any further.
WARNING! Do not push your fingers inside the printer's paper path.
8. Guide the sheet into the printer until the printer beeps and starts pulling the paper.
9. The printer checks the alignment.
10. If the sheet is not correctly aligned, it is ejected, and you will have to try again.
NOTE: If you have an unexpected problem at any stage of the paper loading process, see The paper cannot
be loaded successfully on page 168.
NOTE: Do not load paper if it curls upwards
The stacker
1. Basket
2. Stacker pivoting cover
3. Stacker
ENWW The stacker 57
To Next Page
Loading...