To preview it in the Embedded Web Server, you will need to enter the PIN.
●
Retrieve from Front Panel (Private Job): Use the private printing feature to specify that a job cannot be
printed until you release it with a PIN. Check the PIN to Print checkbox, then give the 4-digit Personal
Identification Number. The PIN is sent to the device as part of the print job. After sending the print job to
the device, use the PIN to print the job. Once printed, it is automatically removed from the printer.
To preview it in the Embedded Web Server or in the front panel, you will need to enter the PIN.
TIP: Define a user name and a job name in the Job storage tab for easy identification in the job queue.
Select print quality
The printer has various print-quality options because best-quality printing requires some loss of speed, while
fast printing implies some reduction in print quality.
Therefore, the standard print-quality selector is a slider that allows you to choose between quality and
speed. With some paper types, you can choose a compromise position between the two.
Alternatively, you can select from the custom options: Best, Normal and Fast. If you select Fast, you can also
select Economode, which uses a lower rendering resolution and consumes less ink. It therefore increases
printing speed even further, but reduces print quality. Economode can be selected only from the custom
options (not from the slider).
There is also two supplementary custom options that may have an effect on print quality: Maximum Detail
and More Passes. See High-quality printing on page 76.
NOTE: In the Windows driver dialog, the rendering resolution for your job is displayed in the Custom Print
Quality Options dialog box (select Custom options and then Settings).
You can select print-quality options in the following ways:
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. If you
select Standard Options, you will see a simple slider with which you can select speed or quality. If you
select Custom Options, you will see the more specific options described above.
●
In the Mac OS X Print dialog: go to the Paper/Quality panel and look at the Quality Options section. If
you select Standard quality options, you will see a simple slider with which you can select speed or
quality. If you select Custom quality options, you will see the more specific options described above.
●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality. If you then
select Standard options, you can choose between Speed and Quality. If you select Custom options,
you will see the more specific options described above.
●
Using the front panel: press , then Default Printing configuration > Print quality.
NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front
panel.
NOTE: You cannot change the print quality of pages that the printer is already receiving or has already
received (even if they have not started to print yet).
Select paper size
The paper size can be specified in the following ways.
NOTE: The paper size specified here should be the paper size in which the document was created. It is
possible to rescale the document to a different size for printing. See Rescale a print on page 74.
ENWW Advanced print settings 71
To Next Page
Loading...