Select paper size
The paper size can be specified in the following ways.
NOTE: The paper size specified here should be the paper size in which the document was created. It is
possible to rescale the document to a different size for printing. See
Rescale a print on page 82.
●
In the Windows driver dialog: select the Paper/Quality tab, then select your paper size from the
Document Size list.
●
In the Mac OS Page Setup dialog: select your printer in the Format for popup menu, then Paper Size.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page size >
Standard.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Paper options >
Select paper size.
NOTE: If you have set the paper size from your computer, that overrides the paper size setting in the
front panel.
NOTE: If you have disabled skew checking, the paper length is estimated as four times the width.
TIP: If your document is 330 × 483 mm (13 × 19 in), designed to fit on sheet paper of the same size, select
the document size Super B/A3.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●
Under Windows, there are three different ways:
◦
In the driver dialog, press the Custom button in the Paper/Quality tab, then specify the name and
the dimensions of your new paper size, then click Save to save your new paper size. In the
PostScript driver, to see your new custom size in the list of custom sizes, you need to exit the
printer properties, then reenter them (and use the More button if necessary).
NOTE: The driver will not allow you to create a paper size whose width exceeds its length.
◦
From the Start menu, select Printers, then from the File menu select Server Properties. In the
Forms tab, check the Create a new form box, specify the name and dimensions of the new form,
then click Save Form.
NOTE: Such forms are not available when using a shared printer that is connected to a different
computer.
●
In the Mac OS Page Setup dialog: select Paper Size > Manage Custom Sizes.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page size >
Custom.
80 Chapter 9 Print options ENWW
To Next Page
Loading...