HP DesignJet T730

Physical specications
Table 24-10 Printer physical specications
HP Designjet T730 Printer HP Designjet T830 Multifunction Printer
Weight 48 kg (105.82 lb) 62.5 kg (137.79 lb)
Width 1402.5 mm (55.22 in) 1402.5 mm (55.22 in)
Depth Minimum: 583.28 mm (22.96 in)
Maximum: 896 mm (35.3 in)
Minimum: 629.19 mm (24.77 in)
Maximum: 896 mm (35.3 in)
Height Minimum: 966 mm (38.03 in)
Minimum without stand: 306 mm (12.05 in)
Maximum: 1155 mm (45.47 in) with trays open
Minimum: 966 mm (38.03 in)
Minimum without stand: 306 mm (12.05 in)
Scanner open: 1060 mm (41.73 in)
Maximum: 1155 mm (45.47 in) with trays open
Memory specications
Table 24-11 Memory specications
HP Designjet Memory
T730/T830 1 GB
Power specications
Table
24-12 Printer power specications
Input Voltage 100–240 V ac ±10%, auto-ranging
Frequency 50/60 Hz
Input Current Max 1200 mA
Typical Power 35 W
Ecological specications
This product complies with the WEEE Directive 2012/19/EU and RoHS Directive 2011/65/EU. To determine the
ENERGY STAR and EPEAT registration status of your product model please visit http://www.hp.com/go/
ecolabels.
Environmental specications
Table
24-13 Printer environmental specications
Operating temperature 5 to 40°C (41 to 104°F)
Recommended operating temperature 15 to 35°C (59 to 95°F), depending on paper type
Storage temperature –25 to 55°C (–13 to 131°F)
Recommended operating humidity 20 to 80% RH, depending on paper type
Storage humidity 0 to 95% RH
200 Chapter 24 Printer specications ENWW