6. Touch Copy. The printer will prompt you to load the original document if you haven’t already.
NOTE: The maximum length of paper that the scanner can scan depends on the paper width and the
scan resolution. An alert is displayed if the maximum memory is exceeded.
Push the sheet into the insertion slot until you feel it contact the rollers. The scanner will automatically
grab the sheet and move it into position for scanning. If you feel that the sheet has loaded badly and you
want to try again, you can pull it out manually.
IMPORTANT: Do not try to feed the scanner while the printer is printing, as only one action can be
done at a time.
Copy settings
Some of the default copy settings are displayed. Touch Settings to see the complete list of settings:
Original settings
●
Content type
●
Lighter/darker allows you to adjust the lightness of the copy.
●
Background noise removal reduces image defects such as wrinkles.
●
Background color removal reduces color defects in the original background.
●
Blueprint for copying blueprint originals with optimum results. This option converts images to grayscale
and inverts the colors, if needed, producing a white background with black lines.
●
Translucent Media is a mode specically for copying images that are on NTP/vellum/other translucent
media, as opposed to opaque media, to obtain optimum results.
72 Chapter 8 Copying ENWW
To Next Page
Loading...
