3. Select Paper load.
4. Select Load roll.
5. Select your paper category and type.
6. Continue with step five of the easy loading process, skipping steps seven and eight.
Tip When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid
this, catch your prints as they are cut from the roll and do not stack prints in the basket or turn off
the automatic cutter, see Using your printer on DVD, and use the Form feed and cut key to release
your print.
Unload a roll
Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow the
appropriate procedure as described below.
ENWW Unload a roll 15
Paper handling
To Next Page
Loading...