HP Designjet Z3100 series Reference Guide

2. Standing behind the printer, rest the spindle's black end on the left side
roll holder. Do not put the end completely into the roll holder.
3. Rest the blue end of the spindle on the right side roll holder. If you are
loading the gray spindle, ensure the rounded side of the spindle top is
resting on the roll holder.
4. With both hands, push the spindle into both roll holders at the same
time. The spindle snaps in place.
ENWW
Load a roll into the printer
13
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)