HP Designjet Z3100 series Reference Guide

5. If the edge of the roll is torn (sometimes due to tape used to hold end
of the roll) or not straight, pull paper slightly beyond the cutting groove
and use a cutter to cut a straight edge.
CAUTION Cut the paper as straight as possible, as uneven
paper does not load correctly.
6. Insert the edge of the paper into the feeder.
WARNING! Do not push your fingers inside the printer's paper
path, the results may be painful.
14 Chapter 3 Paper handling ENWW
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)