6. If skew checking is enabled (see Skew check on page 40), the printer checks the alignment
and measures the sheet. If you have disabled skew checking, you will need to align the sheet
manually.
NOTE: Depending on the length of the sheet, it feeds out the front of the printer.
7. If the paper has been loaded successfully, the front panel displays the Ready message and the
printer ready to print. If the paper is not straight, follow the instructions on the front-panel display.
NOTE: When correctly loaded, the sheet is in the back of the printer.
NOTE: If you have an unexpected problem at any stage of the paper loading process, see The
paper cannot be loaded successfully on page 133.
Paper menu procedure
As an alternative, you can use the front panel to start the paper loading process
1. Perform step
1 of the easy loading procedure.
2.
From the front panel, select the Paper menu icon
.
3. Select Paper load.
34 Chapter 4 Paper handling ENWW
Paper handling
To Next Page
Loading...
