marking accordingly. In addition, it complies with
the WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
●
This device may not cause harmful interference.
●
This device must accept any interference received, including interference that may cause
undesired operation.
Additional information
1. The product is assigned a Regulatory Model Number which stays with the regulatory aspects of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation
and test reports; this number should not be confused with the marketing name or the product numbers.
ENWW Regulatory notices 9
Legal information
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
______________________________________________________________________
Supplier's Name: Hewlett-Packard Company DoC Nº: BCLAA-0608-10
Supplier's Address: Cami de Can Graells, 1-21
08174 Sant Cugat del Vallès
Barcelona, Spain
declares, that the product,
Product Name and Model: HP Designjet Z3100/Z3200/Z2100 Photo printer series,
HP Designjet T1100/T1120/T1200 printer series,
HP Designjet Z5000 printer series,
HP Designjet T610/T620/T770 printer series,
Regulatory Model Number:
1)
BCLAA-0608
Product Options: All
conforms to the following Product Specifications:
Safety: IEC 60950-1:2005 (2nd Edition)/EN60950-1:2006
CAN/CSA-C22.2 No. 60950-1- 07/UL 60950-1:2007
EMC: EN 55022:2006/CISPR 22:2005 Class B
EN 55024:1998 +A1:2001 +A2:2003
EN 61000-3-2:2006/ IEC 61000-3-2:2005
EN 61000-3-3:1995+A1:2001/ IEC 61000-3-3:1994 +A1:2001
FCC Title 47 CFR, Part 15 Class B
Energy Use: Regulation (EC) No. 1275/2008
ENERGY STAR® Qualified Imaging Equipment Operational Mode (OM) Test Procedure
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC,
the EuP Directive
2005/32/EC
and the EMC Directive 2004/108/EEC and carries the -marking accordingly. In addition it
complies with the WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory
Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.
Sant Cugat del Vallés (Barcelona), Vicenç Llorens
December 02 , 2009 Product Regulations Manager
Local contact for regulatory topics only:
EMEA Contact : Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany www.hp.com/go/certificates
USA Contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover St, Palo Alto, CA 94304, USA . Phone: (650) 857
1501.
To Previous Page
Loading...
Need help?
General
