120 Chapter 4 Service Tests and Utilities
Tests and Utilities
1. In the Service Tests submenu, scroll to “12. Color Sensor Test” and press Enter.
2. The Printer will initialize the Color Sensor and the Front Panel will display the following messages:
• Starting Sausalito.
If there is a failure starting the Sausalito, the Front Panel will display System Error Code 01.0:10.
For more information on troubleshooting this error code, refer to page 47.
• Starting Carriage.
If there is a failure at this point, the Front Panel will display System Error Code 02.1:10. For more
information on troubleshooting this error code, refer to page 48. Check also System Error Code
11: 10 (refer to page 51) or System Error Code 01.0:10 (refer to page 47).
• Starting Nvm.
• Getting Part Number.
If there is a failure at this point, the Front Panel will display System Error Code 79:03. For more
information on troubleshooting this error code, refer to page 72.
• Getting Scan Axis Size.
If there is a failure at this point, the Front Panel will display System Error Code xx:xx. For more
information on troubleshooting this error code, refer to page 72.
• Starting Service Station.
If there is a failure at this point, the Front Panel will display System Error Code 21:10. For more
information on troubleshooting this error code, refer to page 52.
• Starting Scan Axis.
If there is a failure at this point, the Front Panel will display System Error Code 42:10. For more
information on troubleshooting this error code, refer to page 60.
• Homing Scan Axis.
If there is a failure at this point, the Front Panel will display System Error Code 42:10. For more
information on troubleshooting this error code, refer to page 60.
• Homing Service Station.
• Moving Carriage out of Service Station path.
• Starting Servicing Services.
• Starting Color Sensor.
• Starting Color Sensing.
• Reading SOL status.
To Next Page
Loading...