176 Chapter 5 Service Calibrations
Service Calibrations
10. Use the Up and Down keys to move the Carriage until the LEFT edge of the Right Alignment Mark
is correctly aligned with the Primer Positioning Indicator and press ENTER.
While the Carriage is moving the Front Panel shows the actual position and the direction of move-
ment and prompts you to press ENTER when done.
11. The Front Panel shows the actual right offset value.
NOTE: To more easily detect the exact position while aligning the Carriage to the Primer it is
a good idea to lightly press down on the Primer while you are moving the Carriage.
To Next Page
Loading...