400 Chapter 8 Removal & Installation
Removal & Installation
Center Platen
Removal
1. Remove the Right Cover
⇒
See page 264
.
2. Remove the Left Cover
⇒
See page 270.
3. Remove the Top Cover
⇒
See page 277.
4. Remove the Service Station
⇒
See page 300.
5. For the 42-inch model, remove the Rear Door
⇒
See
page 281.
6. Squeeze the corners of the OMAS Access Cover
release it from the bottom of the printer.
7. Remove the OMAS Access Cover from the printer.
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...