HP Designjet Z6100 Printer series

Continuable and Non-Continuable Error Codes 69
System Error Codes
Problem Description:
The Postscript fonts are missing. Upgrading the Firmware will re-install the fonts.
Corrective Action:
Perform a full firmware upgrade that includes package ’B’.
System Error:
61:08.1
Problem Description:
The file cannot be printed because it is password protected.
Corrective Action:
Resend the file without password protection.
System Error:
63:04
Problem Description:
Input/Output problem through the Network Card.
Corrective Action:
Try the following:
• Check that the Network cable is correctly connected to the Network Card.
• If a Gigabit Ethernet Card is being used, make sure it is correctly installed. If necessary, replace the
Gigabit Ethernet Card.
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
• If the System Error continues, r
eplace the Main PCA ⇒ Page 375.
System Error:
64:04
Problem Description:
Input/Output problem through the USB Card.
Corrective Action:
Try the following:
• Check that the USB cable is correctly connected to the Printer.
• Check that the USB Card is correctly installed.
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
• Replace the USB card.
System Error:
65:04