70 Chapter 2 System Error Codes
System Error Codes
Problem Description:
Input/Output problem through an unknown port.
Corrective Action:
Try the following:
• Check that the unknown port cable is correctly connected to the Printer.
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
System Error:
66:08
Problem Description:
Cannot print file on current paper type. The paper type has changed since the file was sent, so the file
cannot be printed on the paper type currently loaded.
Corrective Action:
Try the following:
• Resend the file to be printed on the current paper type.
• Change the paper type to the type that was loaded when the file was originally sent.
System Error:
71:03
Problem Description:
Out of memory failure.
Corrective Action:
It is recommended that you remove any unnecessary files from the Hard Disk Drive using the Web Server.
System Error:
71:19
Problem Description:
Different S/N found in Main and Backup NVM.
Corrective Action:
Try the following:
• Perform the “Error 71:19 Recovery” Service Utility (refer to Chapter 4).
System Error:
72:04
NOTE: Do not change the Ink Supply tubes and the Hard Disk at the same time as this will
cause the system error 71:19.
To Next Page
Loading...