Continuable and Non-Continuable Error Codes 71
System Error Codes
Problem Description:
Generic Firmware error.
Corrective Action:
Try the following:
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the
power cord and power On the Printer.
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
System Error:
73:03
Problem Description:
Carriage encoder reading error.
Corrective Action:
Try the following:
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the
power cord and power On the Printer.
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
• Perform the “Scan-Axis” Diagnostic (⇒ Page 97) to further troubleshoot the error code.
• If the System Error continues, perform the “Media Drive” Diagnostic (⇒ Page 101) to further
troubleshoot the error code.
System Error:
74:01
Problem Description:
Error uploading firmware update file.
Corrective Action:
Try the following:
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the
power cord and power On the Printer.
• Resend the firmware update file to the Printer.
System Error:
74:04
Problem Description:
Old vacuum fan, upgrade the firmware.
Corrective Action:
Try the following:
To Next Page
Loading...