HP Designjet Z6100 Printer series

72 Chapter 2 System Error Codes
System Error Codes
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
System Error:
76:03
Problem Description:
Disk out of space.
Corrective Action:
Try the following:
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the
power cord and power On the Printer.
• Resend the file to the Printer.
• If the System Error continues,
it is recommended that you remove any unnecessary files from the Hard
Disk Drive using the Web Server .
System Error:
77:04
Problem Description:
Embedded Web Server internal software error.
Corrective Action:
Try the following:
Try the following:
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the
power cord and power On the Printer.
• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest
version.
System Error:
78.1:04
Problem Description:
Media Settings area missing in media settings file.
Corrective Action:
Try the following:
• Resend the file.
System Error:
79:03
Problem Description:
Generic Firmware error.