4.
Remove the take-up reel spindle.
The front-panel display guides you through the process of loading the take-up
reel spindle core onto the take-up reel spindle. When that task is complete, load
the take-up reel spindle into the printer by pushing firmly on both ends of the
spindle.
5.
Press the OK button on the front panel.
The printer advances the paper. Make sure that the paper passes in front of the
take-up reel deflector.
On the front panel, select a winding direction.
18 Chapter 2 Handle the paper
Handle the paper
To Next Page
Loading...
