Component usage
One cycle is counted when the Carriage makes one movement to the left of the printer and then returns
to the right.
Spittoon section
This section contains information on the different Spittoons located in the printer.
Event logs
This page contains the following information:
●
Last 20 System Error Codes (which prevented the printer from booting)
●
Last 20 System Warnings (which did not prevent the printer from booting, but which required the
user to acknowledge the problem)
●
Printhead Error log
System/Warning error
●
The Line and Internal Code do not provide much information, but are useful in the case of
escalating a problem to the division (different internal error codes can point to the same error
code (e.g. 01.10:10)).
●
Media Usage (in square meters) and Date (from the printer’s Internal Clock (RTC)) help you to
understand if the printer has been used (media usage) and how much time has passed since the
last error.
Printhead error log
●
Printheads ago: History of the last three Printheads used (’0’ represents the current Printhead used).
●
Status:’0’ = Working,’1’ = No Printhead Detected,’2’ = Replace,’4’ = Reseat,’8’ = Remove.
●
% Ink Used: Percentage of the warranty life (1200 ml).
●
Error Code: Specific error code generated by the printer when the Printhead has been replaced.
●
Max Recovery:
◦
0: No manual Printhead recovery has been performed on the Printhead.
◦
1 or higher: At least one Printhead recovery has been performed.
ENWW
How to interpret the Service Information Pages
21
Troubleshooting
To Next Page
Loading...
