11. Remove one T-10 screw and one T-15 screw that secure the ESP to the Carriage Assembly.
12. Tilt the ESP so that it can be removed.
13. Remove the ESP from the Carriage Assembly.
Embedded SpectroPhotometer (ESP) Actuator
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Left Cover See Left Cover on page 222.
2. Remove the Left Spittoon
See Left Spittoon on page 289.
358 Chapter 8 Removal and installation ENWW
Removal and
installation
To Next Page
Loading...
