18. Remove the Center Guide from the printer.
Drive Roller
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Right Cover See Right Cover on page 216.
2. Remove the Left Cover
See Left Cover on page 222.
3. Remove the Right Connector Cover
See Right Connector Cover on page 238.
4. Remove:
●
For the 42-inch model, the Left Connector Cover
See Left Connector Cover (42-inch)
on page 240.
●
For the 60-inch model, the Electronics Module Extension⇒ See
Electronics Module Extension
(60-inch only) on page 241.
5. Remove the Service Station
See Service Station on page 252.
6. Remove the Ink Supply Station
See Ink Supply Station (ISS) on page 276.
7. Remove the Media-Axis Motor
See Media-Axis Motor on page 313.
8. Remove the Encoder Disc and Sensor
See Encoder Disc and Sensor on page 380.
9. Remove the Media Lever Assembly
See Media Lever on page 383.
10. Remove the Media Lever Sensor
See Media Lever Sensor on page 386.
11. Remove the Center Guide
See Center Guide on page 395.
ENWW
Disassembly order
399
Removal and
installation
To Next Page
Loading...
