CAUTION: Do NOT:
●
Use commercial cleaners or abrasive cleaners.
●
Wet the Print Platen directly because you will leave too much moisture behind.
●
Wet the rubber wheels at all (not even with the cloth).
4. Clean the Cutter ramp with the damp cloth.
5. Clean the exposed part of the wheels with a dry cloth. Ideally, clean the whole circumference of
these wheels (you can use Turn Drive Roller Utility on
Turn Drive Roller on page 105).
ENWW
Preventive maintenance
421
Preventive
maintenance
To Next Page
Loading...
