5. Locate the maintenance absorber.
6. Lift the tab that extends from the front edge of the absorber.
NOTE: Use the disposable plastic gloves to avoid getting ink on your hands.
7. Lift the tab on the absorber until it is clear of the spittoon and you can easily grip the tab.
8. Lift and remove the absorber from the spittoon.
9. Dispose of the soiled maintenance absorber according to your local regulations.
Insert the maintenance absorber
1. Grip the new maintenance absorber as shown.
2. Insert the back edge of the absorber into the fitting in the spittoon.
3. Use your thumb to slide the absorber to the back of the fitting in the spittoon.
426 Chapter 9 Preventive maintenance ENWW
Preventive
maintenance
To Next Page
Loading...
