●
Aerosol foam protector
Line Sensor Assembly on page 353, step 6
●
Carriage Assembly (with Encoder sensor)
Carriage Assembly on page 301 (does not include
PCA, Cutter, ESP)
●
Ink Supply Tubes and Trailing Cable
Ink Supply Tubes and Trailing Cable on page 265
●
Tubes retaining clip
Top Cover (60-inch) on page 229, step 7
●
Scraper Assembly and Absorber Foams
Removal of the Service Station Scraper on page 256
●
Scan-Axis Motor
Scan-Axis Motor on page 308
●
Belt Assembly
Belt Assembly on page 308
You must also clean the holes in the Service Station which are located under the Maintenance
Cartridge and check that the Aerosol Fan is functioning correctly.
Preventive Maintenance Kit #2
This Preventive Maintenance Kit #2 contains the following components:
●
Aerosol Filter
Service Station on page 252
●
SVS Aerosol Fan assembly ROHS
Service Station on page 252
●
Ink Absorber
See User’s Guide
●
Left spittoon
Left Spittoon on page 289
●
ESP
Embedded SpectroPhotometer (ESP) on page 355
●
Line Sensor
Line Sensor Assembly on page 353
●
Encoder Strip
Encoder Strip and Encoder Sensor on page 292
You must also clean the holes in the Service Station which are located under the Maintenance
Cartridge and check that the Aerosol Fan is functioning correctly.
428 Chapter 9 Preventive maintenance ENWW
Preventive
maintenance
To Previous Page
Loading...
