HP DeskJet 990C Series - Automatic Paper-Type Sensor; Using the Automatic Paper-Type Sensor

19
Printing Basics: Automatic Paper-Type Sensor
3 Choose one of the following:
• Change Default Print Settings to display the Default Print
Settings dialog box.
• Open Toolbox to display the HP DeskJet Toolbox. For more
information on this box, see “HP DeskJet Toolbox” on page 13.
• Exit to turn off the Printer Settings taskbar icon.
Automatic Paper-Type Sensor
Note:
The Automatic Paper-Type Sensor is not supported in
Windows 3.1x.
When you use the Automatic Paper-Type Sensor, your HP DeskJet
990C can automatically determine the correct paper type for most
paper or media placed into the printer’s IN tray. This feature,
especially when used with HP paper and media, can help you get
the best printing results.
Note:
This feature is not recommended for printed or lined paper
and media.
How to Use the Automatic Paper-Type
Sensor
1 Open the HP Printer Properties dialog box. For more
information, see “Finding the HP Printer Properties Dialog Box”
on page 7.
2 Click the Setup tab.
3 In the Paper Type box, make sure Automatic is selected.
Note:
Automatic is the default paper type setting.