26
Printing Basics: Infrared (Ir) Printing
3 Click the Preferences tab.
4 Click to select Display the Infrared Monitor icon on the
taskbar.
5 Click OK.
Printing using a Palm Pilot
1 Locate the infrared lens on the Palm Pilot.
This is typically found on the top edge of the Palm Pilot.
2 Align the Palm Pilot’s infrared lens with the printer’s infrared lens.
Position the Palm Pilot up to 3 feet (1 meter) from the printer and
within a 30-degree total angle from the printer’s infrared lens.
Note:
The path between the two infrared devices must be clear of
obstacles.
3 Do one of the following:
• Use the Beam command to send a single calendar
appointment, or one or more business cards, to-do list items, or
memos to the printer.
• Use the Print command to send one or more items (such as
calendar appointments, e-mail messages, phone lists, or to-do
lists) to the printer.
Note:
Printing (rather than beaming) requires a printing
program. A printing program can greatly enhance the appearance
of your printed information. When printing, follow the specific
procedures of the program.
To Next Page
Loading...