HP DeskJet 990C Series - Manual Two-Sided Printing

31
Beyond the Basics: Manual Two-Sided Printing
Manual Two-Sided Printing
I should… Then… Guidelines…
Book Binding
Tablet Binding
1
Remove all paper from the OUT tray.
2
Load paper into the IN tray.
3
Slide the paper guides snugly against
the sheets.
4
Push in the IN tray.
5
Open the HP Printer Properties dialog
box (see page 7).
6
Choose HP Print Settings.
Setup Tab
• Paper Type: Choose either
Automatic
or the
appropriate paper type
• Print Quality: Choose the appropriate print
quality
• Paper Size: Choose appropriate size
Features Tab
• Orientation: Choose appropriate orientation
• Two-Sided Printing: Check this box. In the
content size box, click
Cancel
. Choose
Book
or
Tablet
as the paper orientation. Clear the
Automatic
check box.
7
Begin printing.
8
Carefully follow the reloading instructions
displayed on your computer screen.
9
When the paper is properly reloaded, click
Continue
.
• Manual Two-Sided Printing can be done
using either the Rear Access Door or the
attached Automatic Two-Sided Printing
Module.
• The printer automatically prints the odd-
numbered pages first. Then, a message
appears on your computer screen telling
you how to reload the paper in order to print
the even-numbered pages.
Check
Two-Sided
Printing,
then select
Book
or
Tablet
.