Troubleshooting 51
Server fault indications flowchart
Symptom: Server boots, but the internal health LED or external health LED is red or amber.
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item See
1
Server maintenance and service guide, located on the Support CD or the
HP website (http://www.hp.com/products/servers/platforms
)
2 "Power-on problems flowchart (on page 45)"
3 "HP Insight Diagnostics (on page 35)"
4
•
"Hardware problems (on page 52)"
•
Server maintenance and service guide, located on the Support CD or
the HP website (http://www.hp.com/products/servers/platforms)
5 "HP contact information (on page 86)"
To Next Page
Loading...
