HP ProLiant DL360 G3 Server High-Density Deployment
Preliminary
17
To use the Rack/Site
Installation
Preparation Utility
Select either the Express or Advanced mode of calculation. Express calculation uses
pre-set values for components and can be used for producing a quick estimate of system
requirements. Advanced calculation requires user to configure individual components
and is recommended for final installation planning. If Express mode is selected,
proceed to step 5.
1. Select DL360G3 tab at bottom of screen. The individual component
configuration page is displayed (Figure 7). Starting with the line voltage, select
the configuration parameters desired, scrolling down to ensure all appropriate
parameters are chosen. Be aware of error messages indicating possible
problems.
2. When component configuration is complete, click on the Rack Site
Installation tab to return to the main calculator page (Figure 6).
Complete the Load Requirements and Input Line Voltage configuration areas.
Each configuration change will be calculated instantly. The rack space indicator
indicates the amount of vertical space used/available.
Figure 7. Opening Screen Of Individual Component Calculator
To Next Page
Loading...
