To Next Page

To Previous Page

Operations 25

Remove the fan cage.

CAUTION: Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

IMPORTANT: For optimum cooling, install fans in all primary fan locations. For more

information, refer to the fan locations table ("Hot-plug fans" on page 19).

To replace the component, reverse the removal procedure.

Remove the hot-plug fan

To remove the component:

1. Extend or remove the server from the rack ("Extend the server from the rack" on page 21).

2. Remove the access panel (on page 22).

Storage Networks

www.storagenetworks.com

Authorized HP Reseller

Spare Parts:

http://www.storagenetworks.com/products/servers/hp/DL380G8/dl380pg8_servers_landing.php

Questions and Answers:

Need help?

Do you have a question about the HP DL380P and is the answer not in the manual?

HP DL380P Specifications

General

Product Line	ProLiant
Rack Height	2U
Processor Sockets	2
Memory	Up to 768 GB
RAID Levels	0, 1, 5, 6, 10, 50, 60
Management	HP iLO (Integrated Lights-Out)
Server Type	Rack
Processor	Intel Xeon E5-2600 series
Chipset	Intel C600
Memory Slots	24
Memory Type	DDR3
Drive Bays	25 SFF
Hard Drive Interface	SAS, SATA
Network	Gigabit Ethernet
Power Supply	Redundant Power Supplies supported
Expansion Slots	6 PCIe Gen3 slots
Operating System Support	Windows Server, Linux, VMware
Remote Management	HP iLO (Integrated Lights-Out)
Form Factor	Rackmount