Need help?Do you have a question about the HP DL380 and is the answer not in the manual?
General| Product Line | ProLiant |
|---|---|
| Memory Type | DDR4 |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Processor | Intel Xeon Scalable |
| Memory | HPE DDR4 SmartMemory |
| Storage | SFF, LFF SAS/SATA/SSD, NVMe PCIe |
| Server Type | Rack Server |
| RAID Support | HPE Smart Array Controllers |
| Management | HPE iLO Standard with Intelligent Provisioning |
| Power Supply | HPE Flexible Slot Power Supplies |
Details about front panel components for SFF and LFF models.
Identifies various ports and connectors on the server's rear panel.
Labels and describes key components located on the server's system board.
Explains LED indicators for SAS/SATA drives and their meanings.
Step-by-step instructions for safely powering down the server.
Procedure for safely extending the server from its rack mounting.
Instructions for removing the server's chassis access panel.
Information and links for planning server rack installations.
Guidelines for selecting a suitable environment for server installation.
Step-by-step guide for securely installing the server into a rack.
Instructions for installing or replacing a server processor.
Information on memory types, speeds, and installation guidelines.
Guidance on installing various PCI and PCIe expansion boards.
Steps for installing and enabling the Trusted Platform Module (TPM).
Diagrams illustrating SAS hard drive cable connections.
Diagrams showing optical drive cable connections.
Diagrams illustrating FBWC battery cabling.
Overview of HP SmartStart for server setup and deployment.
Guide to configuring server settings using RBSU.
Explanation of Advanced Memory Protection modes.
Information about firmware updates and the Smart Update Firmware DVD.
Initial steps to take before starting server troubleshooting.
Important safety warnings and precautions for troubleshooting.
Overview of diagnostic flowcharts to guide problem resolution.
FCC compliance information for Class A and B devices.
EU directives and CE marking compliance information.
Precautions to avoid damage from static electricity.
Techniques for proper grounding to prevent ESD.
Operating and storage environmental conditions for the server.
Physical dimensions and weight of the server.
Details on power supply input and output ratings.
Ways to contact HP for support and service.
Information about HP's Customer Self Repair program.
To Next Page