HP ELITE x2 1012 G1 - Page 24

QuickSpecs
HP Elite x2 1012 G1
Technical Specifications
Not all configuration components are available in all regions/countries.
c04895999 — DA – 15477 — Worldwide — Version 16 – March 22, 2017
Page 24
scanning on channel 12/13 and are
capable of transmitting must fully
comply with requirements of 15.247 or
otherwise disable those channels.
802.11a/n
 4.9 – 4.95 GHz (Japan)
 5.15 – 5.25 GHz
 5.25 – 5.35 GHz
 5.47 – 5.725 GHz
 5.825 – 5.850 GHz
Note: Indonesia no support this band)
Data Rates
 802.11b: 1, 2, 5.5, 11 Mbps
 802.11g: 6, 9, 12, 18, 24, 36, 48, 54
Mbps
 802.11a: 6, 9, 12, 18, 24, 36, 48, 54
Mbps
 802.11n: MCS 0 ~ MCS 15, (20MHz,
and 40MHz)
 802.11ac : MCS0 ~ MCS9, (1SS, and
2SS) (20MHz, 40MHz, and 80MHz)
Modulation
Direct Sequence Spread Spectrum
BPSK, QPSK, CCK, 16-QAM, 64-QAM, 256-QAM
Security
1
 IEEE and WiFi compliant 64 / 128 bit WEP
encryption for a/b/g mode only
 AES-CCMP: 128 bit in hardware
 802.1x authentication
 WPA, WPA2: 802.1x. WPA-PSK, WPA2-
PSK, TKIP, and AES.
 WPA2 certification
 IEEE 802.11i
 Cisco Certified Extensions, all versions
through CCX4 and CCX Lite
 WAPI
Network Architecture
Models
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
Roaming
IEEE 802.11 compliant roaming between access
points
Output Power
2
 802.11b : +16dBm minimum
 802.11g : +14dBm minimum
 802.11a : +14dBm minimum
 802.11n HT20(2.4GHz) : +14dBm
minimum
 802.11n HT40(2.4GHz) : +12dBm
minimum
 802.11n HT20(5GHz) : +14dBm minimum
 802.11n HT40(5GHz) : +12dBm minimum
Power Consumption
Transmit: 2.0 W (max)
Receive: 1.6 W (max)