EasyManuals Logo

HP EliteBook 2760p Getting Started Guide

HP EliteBook 2760p
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard
drive. All files you have created and any software installed on the computer are permanently
removed. When reformatting is complete, the recovery process restores the operating system, as well
as the drivers, software, and utilities from the backup used for recovery.
1. If possible, back up all personal files.
2. If possible, check for the presence of the Windows partition and the HP Recovery partition.
To check for the Windows partition, select Start > Computer.
To check for the HP Recovery partition, click Start, right-click Computer, click Manage, and
then click Disk Management.
NOTE: If the Windows partition and the HP Recovery partition are not listed, you must recover
your operating system and programs using the Windows 7 operating system DVD and the Driver
Recovery disc (both purchased separately). For additional information, refer to
Using a Windows
7 operating system DVD (purchased separately) on page 50.
3. If the Windows partition and the HP Recovery partition are listed, restart the computer, and then
press f8 before the Windows operating system loads.
4. Select Startup Repair.
5. Follow the on-screen instructions.
NOTE: For additional information on recovering information using the Windows tools, perform a
search for these topics in Help and Support.
Using f11 recovery tools
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files
you have created and any software installed on the computer are permanently removed. The f11
recovery tool reinstalls the operating system and HP programs and drivers that were installed at the
factory. Software not installed at the factory must be reinstalled.
To recover the original hard drive image using f11:
1. If possible, back up all personal files.
2. If possible, check for the presence of the HP Recovery partition: click Start, right-click
Computer, click Manage, and then click Disk Management.
NOTE: If the HP Recovery partition is not listed, you must recover your operating system and
programs using the Windows 7 operating system DVD and the Driver Recovery disc (both
purchased separately). For additional information, refer to
Using a Windows 7 operating system
DVD (purchased separately) on page 50.
3. If the HP Recovery partition is listed, restart the computer, and then press esc while the “Press
the ESC key for Startup Menu” message is displayed at the bottom of the screen.
4. Press f11 while the “Press <F11> for recovery” message is displayed on the screen.
5. Follow the on-screen instructions.
Using a Windows 7 operating system DVD (purchased separately)
To order a Windows 7 operating system DVD, go to http://www.hp.com/support, select your country
or region, and follow the on-screen instructions. You can also order the DVD by calling technical
support. For contact information, refer to the Worldwide Telephone Numbers booklet included with
the computer.
50 Chapter 7 Backup and recovery

Table of Contents

Other manuals for HP EliteBook 2760p

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteBook 2760p and is the answer not in the manual?

HP EliteBook 2760p Specifications

General IconGeneral
HDD capacity- GB
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
Storage mediaSSD
Optical drive typeNo
Card reader integratedYes
Total storage capacity128 GB
Compatible memory cardsMMC, SD
Memory slots2x SO-DIMM
Internal memory4 GB
Memory clock speed1333 MHz
Maximum internal memory16 GB
Operating system installedWindows 7 Professional
Operating system architecture64-bit
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 90 %
Graphics cardHD Graphics 3000
Graphics card familyIntel
Intel segment taggingEnterprise
Minimum storage drive space250 GB
Display diagonal12.1 \
Display resolution1280 x 800 pixels
Native aspect ratio16:10
Bus typeDMI
SteppingJ1
Tjunction100 C °C
Processor cache3 MB
Processor cores2
System bus rate5 GT/s
Processor familyIntel® Core™ i5
Processor seriesIntel Core i5-2500 Mobile Series
Processor socketBGA 1023
Processor threads4
Processor codenameSandy Bridge
Processor frequency2.6 GHz
Processor cache typeSmart Cache
Processor lithography32 nm
Processor front side bus- MHz
PCI Express slots version2.0
Processor boost frequency3.3 GHz
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)35 W
CPU multiplier (bus/core ratio)26
Maximum number of PCI Express lanes16
Audio systemSRS Premium Sound
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version2.1+EDR
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile network generation3G
Charging port typeDC-in jack
HDMI ports quantity-
USB 2.0 ports quantity3
Firewire (IEEE 1394) ports1
Battery life (max)5.5 h
Number of battery cells6
Cable lock slot typeKensington
Keyboard layoutQWERTY
Pointing deviceTouchpad
Form factorConvertible (Swivel)
Product typeHybrid (2-in-1)
Country of originChina
Processor codeSR046
Processor ARK ID50072
Processor package size37.5 x 37.5 (rPGA988B); 31 x 24 (BGA1023) mm
Supported instruction setsAVX
Intel Identity Protection Technology version1.00
On-board graphics card ID0x116
On-board graphics card modelIntel® HD Graphics 3000
On-board graphics card familyIntel® HD Graphics
On-board graphics card base frequency650 MHz
On-board graphics card dynamic frequency (max)1300 MHz
Weight and Dimensions IconWeight and Dimensions
Depth212 mm
Width290 mm
Height32.3 mm
Weight1800 g

Related product manuals