7. If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips M2.0×2.0 screws
that secure the panel to the display enclosure, and then rotate the display panel over onto the keyboard
(2).
The raw display panel is available using spare part number 806861-005 for HD panels, 806860-008 for
FHD panels, and 806862-005 for QHD panels.
8. On the back of the display panel, lift the tape from atop the connector (1), and then disconnect the
display cable from the rear of the panel (2).
9. Remove the display panel from the enclosure (3).
70 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
