Table 6-10 Fan description and part number
Description Spare part number
Fan assembly M07102-001
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 33).
2. Remove the bottom cover (Bottom cover on page 33).
3. Disconnect the battery cable from the system board (see Battery on page 43).
Remove the fan assembly:
1. Remove the cables from the clips on the side of the fan (1).
2. Disconnect the fan cable from the system board (2).
3. Loosen the three Phillips captive screws (3) that secure the fan to the computer, and then remove the
fan from the computer (4).
Reverse this procedure to install the fan assembly.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table
6-11 Heat sink descriptions and part numbers
Description Spare part number
Heat sink M07204-001
Before removing the heat sink, follow these steps:
54 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
