HP EliteDesk 600 G3 - Rear Panel Components (Elitedesk 800, and Prodesk 600)

Rear panel components (EliteDesk 800, and ProDesk 600)
NOTE: Your computer model may look slightly dierent from the illustration in this section.
Item Icon Component Item Icon Component
1 Antenna cover 7 Optional port (DisplayPort, HDMI, VGA, Serial
or USB-CTM) (USB-CTM option has alt mode
DisplayPort or 15W output)
NOTE: The DisplayPort is optional and may
be replaced with one of the following ports:
HDMI, VGA, USB Type-C alternate mode, or
serial port.
2 Cover lock switch 8 USB 3.x ports (2) (black)
3 Security cable slot 9 USB 3.x ports (2) (black)*
4 External antenna connector 10 RJ-45 (network) jack
5 Padlock loop 11 Power connector
6 Dual-Mode DisplayPort (D++) (2)
*These USB ports allow for wake from S4/S5 hibernation system power states using the keyboard or mouse when enabled in BIOS.
Rear panel components (EliteDesk 800, and ProDesk 600) 3