HP EliteDesk 705 G2 Small Form Factor

To install the small bae, reverse the removal procedure.
Fan bae
The fan bae sits on top of the fan sink.
1. Prepare the computer for disassembly (Preparation for disassembly on page 19).
2. Remove the access panel (Access panel on page 20).
3. Remove the power cable from the clips on top of the bae.
4. Lift the bae o the fan sink and out of the computer.
To install the fan bae, reverse the removal procedure.
48 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis