HP EliteDesk 800 G3 SFF

Rear panel components
Rear panel components
1 Audio-in jack 6 DisplayPort monitor connectors (2)
2 Serial port (optional) 7 Optional port
3 RJ-45 (network) jack 8 USB 2.0 ports (2)
4 Power cord connector 9 USB 3.x ports (4)
5 Audio-out jack for powered audio devices
NOTE: Your model may have additional optional ports available from HP.
When a device is plugged into either audio jack, a dialog box will appear on the monitor screen asking if you want to use the jack
for a microphone or a headphone. You can also recongure the jacks at any time by double-clicking the Audio Manager icon in the
Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the
integrated graphics on the system board may be used. The specic graphics card installed and software conguration will
determine the behavior.
The system board graphics can be disabled by changing settings in BIOS F10 Setup.
Rear panel components 3