EasyManuals Logo

HP EliteDisplay S231d User Manual

HP EliteDisplay S231d
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
5. Connect the circular end of the power supply cord to the DC power IN connector on the back of
the monitor. Connect the female end of the three-pronged power cord to the power supply and
the male end to an electrical wall outlet.
NOTE: The outer case of DC Out 90 watt devices must meet IEC60950–1 requirements.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from the AC outlet.
If provided with a 3–pin attachment plug on the power cord, plug the cord into a grounded
(earthed) 3–pin outlet. Do not disable the power cord grounding pin, for example, by attaching a
2–pin adapter. The grounding pin is an important safety feature.
For your safety, do not place anything on power cords or cables. Arrange them so that no one
may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from
the electrical outlet, grasp the cord by the plug.
6 Chapter 2 Setting Up the Monitor ENWW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteDisplay S231d and is the answer not in the manual?

HP EliteDisplay S231d Specifications

General IconGeneral
3D-
Pixel pitch0.265 x 0.265 mm
Display diagonal23 \
Display technologyLED
Vertical scan range50 - 60 Hz
Horizontal scan range24 - 80 kHz
Viewable size, vertical286.4 mm
Contrast ratio (dynamic)5000000:1
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal509 mm
Display brightness (typical)250 cd/m²
HDCPYes
USB hub version3.2 Gen 1 (3.1 Gen 1)
HDMI ports quantity0
USB Type-A downstream ports quantity2
Product colorBlack
Country of originChina
Market positioningBusiness
Tilt angle range-5 - 30 °
Panel mounting interface100 x 100 mm
AC input voltage100 - 240 V
Power consumption (standby)2.2 W
Power consumption (typical)38 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)242.4 mm
Height (with stand)469.9 mm
Depth (without stand)51 mm
Width (without stand)544 mm
Height (without stand)329 mm
Weight (without stand)6120 g

Related product manuals