3. Remove the top cap (2) from the Retail Jacket.
CAUTION: Before positioning the Retail Jacket with the tablet display panel facing down, make sure
the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution
can result in damage to the display panel.
4. Turn the Retail Jacket right side up with the bottom toward you.
5. If installed, slide the tablet out of the Retail Jacket.
Reverse this procedure to install the top cap.
Battery
Description
Spare part number
Battery (2-cell, 21-Wh, 2.96-Ah, Li-ion) 687946-001
Before removing the battery, follow these steps:
64 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
