Installing a hard drive
1. Insert the hard drive (1) into the hard drive bay, and then slide the hard drive to the left until it
snaps into place.
2. Replace the hard drive screws (2).
3. Replace the battery.
NOTE: For instructions on replacing the battery, refer to Inserting the battery on page 28.
4. Replace the battery cover (1).
5. Slide the battery cover (2) to the rear until it is seated.
NOTE: The battery cover release latch automatically locks into place.
6. Reconnect external power and external devices.
7. Turn on the computer.
34 Chapter 5 Maintenance ENWW
To Next Page
Loading...
