EasyManua.ls Logo

HP Envy 15

HP Envy 15
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Under Step 2: Select a Download, click the BIOS link.
7. Click the link for the most recent BIOS.
8. Click the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 41).
5. Remove the service door (see
Service door on page 42).
Remove the memory module:
1. Lift the left edge of the memory module shield and swing it up and to the right until the memory
modules are accessible.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
Component replacement procedures 49

Table of Contents

Related product manuals