3. Separate the computer (3) from the display assembly.
4. If it is necessary to replace the display back cover or any of the display assembly internal components:
NOTE: When replacing the display back cover, be sure that the display hinges and antenna are
removed from the defective display back cover and installed in the replacement display back cover.
CAUTION: Before turning the display assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
a. Position the display assembly upside down.
b. Pry up on each side of the display back cover to disengage the display back cover from the display
panel assembly.
c. Remove the display back cover.
The display back cover is available using spare part number 835865-001.
5. If it is necessary to replace the webcam/microphone module:
HP
Condential
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
Need help?
General
