To Next Page

To Previous Page

217

# Create an MD for VPN instance a.

[PE1] multicast-domain vpn-instance a

# Create an MD IPv6 address family for VPN instance a and enter its view.

[PE1-md-a] address-family ipv6

# Specify the default group, the MD source interface, and the data-group range for VPN

instance a.

[PE1-md-a-ipv6] default-group 239.1.1.1

[PE1-md-a-ipv6] source loopback 1

[PE1-md-a-ipv6] data-group 225.2.2.0 28

[PE1-md-a-ipv6] quit

[PE1-md-a] quit

# Assign an IP address to GigabitEthernet 1/0/1.

[PE1] interface gigabitethernet 1/0/1

[PE1-GigabitEthernet1/0/1] ip address 192.168.6.1 24

# Enable PIM-SM, MPLS, and IPv4 LDP on GigabitEthernet 1/0/1.

[PE1-GigabitEthernet1/0/1] pim sm

[PE1-GigabitEthernet1/0/1] mpls enable

[PE1-GigabitEthernet1/0/1] mpls ldp enable

[PE1-GigabitEthernet1/0/1] quit

# Associate GigabitEthernet 1/0/2 with VPN instance a, and assign an IPv6 address to the

interface.

[PE1] interface gigabitethernet 1/0/2

[PE1-GigabitEthernet1/0/2] ip binding vpn-instance a

[PE1-GigabitEthernet1/0/2] ipv6 address 10:110:1::1 64

# Configure GigabitEthernet 1/0/2 to run OSPFv3 process 2 in Area 0, and enable MLD on the

interface.

[PE1-GigabitEthernet1/0/2] ospfv3 2 area 0.0.0.0

[PE1-GigabitEthernet1/0/2] mld enable

[PE1-GigabitEthernet1/0/2] quit

# Associate GigabitEthernet 1/0/3 with VPN instance a, and assign an IPv6 address to the

interface.

[PE1] interface gigabitethernet 1/0/3

[PE1-GigabitEthernet1/0/3] ip binding vpn-instance a

[PE1-GigabitEthernet1/0/3] ipv6 address 10:110:2::1 64

# Configure GigabitEthernet 1/0/3 to run OSPFv3 process 2 in Area 0, and enable IPv6 PIM-SM

on the interface.

[PE1-GigabitEthernet1/0/3] ospfv3 2 area 0.0.0.0

[PE1-GigabitEthernet1/0/3] ipv6 pim sm

[PE1-GigabitEthernet1/0/3] quit

# Assign an IP address to Loopback 1, and enable PIM-SM on the interface.

[PE1] interface loopback 1

[PE1-LoopBack1] ip address 1.1.1.1 32

[PE1-LoopBack1] pim sm

[PE1-LoopBack1] quit

# Configure BGP.

[PE1] bgp 100

[PE1-bgp-default] group vpn-g internal

[PE1-bgp-default] peer vpn-g connect-interface loopback 1

Brand	HP
Model	FlexNetwork MSR 954
Category	Network Router
Language	English

HP FlexNetwork MSR 954 User Manual

Table of Contents

Other manuals for HP FlexNetwork MSR 954

Questions and Answers:

HP FlexNetwork MSR 954 Specifications

Related product manuals