8
Figure 2 Installation flowchart
Installing the router
Mounting the router on a workbench
IMPORTANT:
• Make sure the workbench is clean, stable, and reliably grounded.
• Maintain a minimum clearance of 10 cm (3.9 in) around the router for heat dissipation.
• Do not place heavy objects on the router.
To mount the router on a workbench:
1. Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
2. Place the router with the upside up on the workbench.
To Next Page
Loading...
